Coperion K-Tron Exhibits Material Handling and Feeding Systems for
Primary Resin Production, Compounding, and Extrusion at NPE 2012

Coperion K-Tron invites you to stop by booth 6645 at NPE 2012, held April 2-5, 2012, at the Orange County Convention Center, Orlando, Florida, to preview the latest feeding, pneumatic conveying and systems engineering equipment and solutions for plastics processing applications.

Click here for your complimentary GUEST PASS

Coperion K-Tron booth location

Click here to preview Orange County Convention Center & NPE 2012 Campus Layout

PREVIEW VIDEO: Polyolefin Production Plant Animation

   

Coperion K-Tron Application Expertise includes:

PE Resin / Bulk Polymer Compounding   |  Polyolefin Production   |  Wood Plastic Composites
High Performance Compounding   |  Long Fiber Thermoplastics    |  BOPP Film Production    |  Continuous Hot Melt Production    |  Textile Fiber Production    |  Gravimetric Extrusion Control    |  Calcium Carbonate in Plastics Compounding    |  Conveying Urea    |  Feeding & Conveying in PVC Production    


Stop by the booth and learn more about the following: 

Alternative Form of Mechanical Hopper Agitation:  ActiFlowTM

When feeding cohesive or other difficult materials, intermittent or inconsistent flow through the feeder’s hopper impairs performance and can even halt the process. The ActiFlow Smart Bulk Solids Activator reliably prevents bridge-building and ratholing of cohesive bulk materials in stainless steel hoppers, in loss-in-weight feeding applications, eliminating the need for mechanical vertical agitation.

ActiFlow is a non-product contact device, consisting of a vibratory drive and intelligent control unit. The ActiFlow device is bolted to the outside of the rear wall of the extension hopper, above the feeder, reducing headroom requirements. Together with the Coperion K-Tron Control Module (KCM) and ActiFlow Control unit, it continuously activates the material inside the hopper with an optimized frequency and amplitude based on changing material flow conditions.

Coperion K-Tron ProBlendTM Zone Blender

The Coperion K-Tron ProBlendTM Zone Blender is used in applications requiring blending or homogenizing of free flowing bulk material within a hopper or silo. With its special geometric shape, the compact and simple Zone Blender provides multiple flow zones in which the material can pass through at different velocities and residence times.  As a result, the discharged material contains a uniformed blend of material from the hopper or silo. The Zone Blender uses a combination of mass flow (first in – first out) with funnel flow (last in – last out) to help homogenize the blend and reduce the effect of segregation in re-circulating, batch or continuous systems, or any application requiring the blending of materials.

 


Continuous Gravimetric Extrusion Control Software

Coperion K-Tron's new extrusion control package offers the ability to control the extruder speed so that its output has a predictable and repeatable mass flow. By accurately measuring material throughput, gravimetric extrusion control can compensate for material and process variations and provide more consistent end product quality.  It is primarily targeted for use with single screw flood fed extruders in both mono- and co-extrusion applications such as profile extrusion, cast sheet, blown film, cable coating and laminating.

Gravimetric extrusion control is virtually a necessity for multi-layer co-extrusion systems. Its benefits include exact control of end product quality, significant savings in material costs, highly accurate multi-layer co-extrusion of films, longer production runs due to consistent extruder output and the ability to detect problems before the product goes out of specification.

Coperion K-Tron Filter Receiver

Airborne material is trapped by the filter bags. Timed, compressed-air pulses clean the filter bags, dropping the once airborne material into the hopper. The filter bags are protected from the material mainstream by a deflector shield.

Efficient performance of the filter receiver is achieved through the proper selection of filter media and the correct air-to-cloth ratio. Unit allows easy access to receiver’s filter bags with control panel regulating the frequency and duration of each pulse with control panel displaying which row of bags is being cleaned.

Filter Receivers provide automatic material-from-air separation with filter bags that are cleaned by bursts of compressed air. The tangential inlet, located in the receiver’s circular hopper, provides a cyclonic separation of the material/air stream.

 

Coperion K-Tron AerolockTM Rotary Valves (HD, MD):

Coperion K-Tron Aerolock™ rotary valves are backed by more than 45 years of experience-tested airlock design and application. Coperion K-Tron is continually upgrading and refining airlocks, which now include more than 150 models and sizes. This broad scope and variety of Aerolock sizes and models enables Coperion K-Tron to provide the most appropriate airlocks and rotary valves for applications in the food, plastics and chemical process industries.

Units on display include the Heavy-Duty (HD) and Maximum-Duty (MD) Aerolock, with the (HD) Aerolock designed for heavy-duty industrial service performing at up to 15 PSI pressure differential and temperatures up to 225° F. The (MD) Aerolock is engineered for heavy to severe industrial service with pressure differentials up to 20 PSI and temperatures of +450°.

 



Quick Change Feeder: Ideal for customized runs

Coperion K-Tron Quick Change / Quick Clean T35/S60 Feeder: First designed with the needs of the Masterbatch industry in mind, this feeder allows the customer to quickly change from a single screw S60 screw configuration to a twin screw T35 screw configuration, as material needs change and is ideal for short customized runs. Unit is available in both volumetric and gravimetric models and is ideal for applications where only one feeder must feed a large variety of products, where a “super clean” execution is required and where product contamination is not allowed.

 

 


Other Equipment on Display:

  • MT12 Micro ingredient Feeder: For extremely low rate feeding of free flowing to difficult powders and micropellets.
  • K-Vision: A Human Machine Interface (HMI) for controlling up to 16 feeders in a single process line. The K-Vision offers advanced trending and logging capabilities, and supports all of the different feeding control types for both continuous and batch operation.
  • Bulk Solids Pump Feeder™ line:  A patented feeder line specifically designed and engineered to provide gentle, precise feeding of free-flowing pellets, granules, flakes, powders, and friable materials. The BSP feeders do not use screws/augers, belts, or vibratory trays to convey materials. These feeders utilize positive displacement action to move material uniformly, from storage hopper to discharge outlet. Units on display include the BSP-100, BSP-135, BSP-150P and a running BSP-150S with Premier P10 receiver.
  • Smart Weigh Belt (SWB-300): For gravimetric batch and continuous applications or for wild flow metering. Typically used where headroom is limited, or when feeding friable material that may be damaged by other feeders.
  • Coperion K-Tron 2410 Vacuum Sequencing Receiver, Filter Receiver): The 2410 stainless powder receiver and the Filtair Series filter receiver demonstrating continuous vs. sequencing system flow.
  • Coperion K-Tron Bin Vent (Modular Cartridge Bin Vent): The Modular Cartridge Bin Vent is used for conveying applications requiring air filtration. This unit traps fine airborne particles with its large cartridge filter while material is pneumatically conveyed into a storage tank.

    We look forward to seeing you at NPE 2012!